Ethyl fluoroacetate Supplier: Precautions during use of ethyl fluoroacetate

Suppliers of Ethyl Fluoroacetate_ethyl fluoroacetateIn the process of use, its vapor and air can form an explosive mixture, which can cause combustion and explosion when exposed to open flame and high heat energy; it can react with oxidant and release highly toxic smoke when exposed to high heat decomposition.ethyl fluoroacetateSteam is heavier than air, can spread to a considerable distance in the lower place, the fire source will catch fire back; in case of high heat, the internal pressure of the container increases, there is a risk of cracking and explosion. When burned, harmful combustion products such as carbon dioxide are also produced. Therefore,ethyl fluoroacetateThere are many matters that need to be paid attention to in the use process. Here is a brief introduction for everyone.

Suppliers of Ethyl Fluoroacetate_ethyl fluoroacetatePrecautions during use:

1Closed operation, provide sufficient local exhaust, use explosion-proof ventilation system and equipment to preventethyl fluoroacetateSteam leakage into the workplace air;

2,ethyl fluoroacetateOperators must be specially trained and strictly abide by the operating procedures. It is recommended that operators wear self-priming filter gas masks, rubberized clothing and rubber gloves;

3,ethyl fluoroacetateKeep away from fire and heat sources. Smoking is strictly prohibited in the workplace. Welding and cutting operations are not allowed before cleaning liquid and steam to avoid smoke and contact with oxidants, reducing agents, acids and alkalis;

4B. Equipped with corresponding types and quantities of fire-fighting equipment and leakage emergency treatment equipment.

ethyl fluoroacetateIn case of burning and explosion during use, firefighters should wear filter-type gas masks or isolation respirators, and wear full-body fire and poison suits to extinguish the fire in the upper wind direction, and move the container from the fire scene to an open place as much as possible. The fire extinguishing agent can be atomized water, foam, dry powder, carbon dioxide, sand, and water spray to keep the fire site container cool until the end of the fire extinguishing.