Operation, Disposal and Storage of Ethyl Fluoroacetate

Ethyl fluoroacetate is often operated in a sealed environment, so it is necessary to provide sufficient local exhaust function indoors to avoidethyl fluoroacetateThe steam leaks into the workplace. At the same time, the personnel who operate fluoroethyl acetate need to undergo relevant training, and need to abide by the relevant operation procedures during the operation. During the experiment, it is recommended that the relevant operators need to wear some filter-type gas masks and put on some anti-virus clothing. More importantly, wear rubber gloves, and stay away from fire and heat sources during the operation.

In the experimental site can not use some flammable and explosive items, while equipped with some ventilation system and equipment. The liquid and steam of ethyl fluoroacetate cannot be cut and welded before to avoid harmful smoke. Ethyl fluoroacetate should avoid contact with reducing agents, oxidants, alkaline substances, acids, etc., and the variety and quantity of fire fighting equipment it is equipped with should go through relevant safety inspection. In addition, some leakage emergency treatment facilities are required, and some harmful chemicals may remain after the equipment is emptied.

Containers containing ethyl fluoroacetate should be placed in a ventilated and cool warehouse, away from kindling and heat sources. Also avoid being exposed to direct sunlight. At that time, the pigment kept its container in a sealed state, and stored separately from some chemicals to avoid chemical reactions. Some explosion-proof lighting and ventilation facilities should be used in the storage, and some tools and equipment prone to sparks should not be used.

　　ethyl fluoroacetateAs a pharmaceutical intermediate, it can be used to synthesize some pharmaceutical chemicals. Ethyl fluoroacetate is obtained by the action of potassium fluoride and ethyl fluoroacetate. Acetamide needs to be added into the reactor, heated at 130 degrees Celsius, stirred for 30 minutes, removed the water and then added to the raw materials, raised the temperature, and passed through a fractionating column during the stirring process to take out the reaction product, the corresponding components are obtained after rectification.

As a colorless liquid, ethyl fluoroacetate will burn when it meets open flame, and even emit some toxic gases in high temperature environment. When it meets moisture, it will even decompose some corrosive gases. Therefore, warehouses storing fluorine and ethyl acetate usually need to be ventilated and keep the environment dry. At the same time, attention should be paid to moisture prevention and some foods and oxidants, and they need to be stored and transported separately. Ethyl monofluoroacetate fire can be used when carbon dioxide fire extinguisher, foam fire extinguisher and dry powder fire extinguisher and so on.